Payment & Shipping Terms:
|Max Loading:||800Kg||Acceleration:||50~1200 M/s2|
|Pulse Time:||3~20 Ms||Max Dropped Height:||60mm|
|Control System:||Shock DAQ Measuring System||Standard:||GB/T2423|
laboratory testing equipment,
mechanical testing machine
Programmable simulation environmental temperature shock test machine/thermal shock test machine
Thermal shock tester is used to test the capability of material structure or composite materials to withstand the continuous environmental changes between extremely high temperature and low temperature during a short period, and therefore
understand the chemical changes or physical damages caused by expansion from heat and contraction from cold in the shortest possible time. It is applicable to metals, plastic, rubber, electronics amongst other materials. The test result can
be used as a reference or basis for product improvement.
1.Temperature shock test chamber is divided into three boxes: high temperature, low temperature, and the testing area, testing products placed on the testing area; when testing, the valve , which drove by cylinder,lead the high temperature or
low temperatures into the testing area. The test sample is in static mode.
2.Using touch-control graph control as operation interface, easy to operate.
3.Applying wind route conversation to the shock method to distribute temperature to the testing zone for cold and thermal shock measurement.
4.For high temperature shock or low temperature shock, maximum time is up to 999H, and maximum circulation cycles are 9999 times.
5.The system can be used for automatic Circulation Shock or manual selective shock.
6.Adopt binary cooling system, with quick cooling effect. Cooling method is water cooling.
7.Can entering normal temperature. R232 and R485 communication interface.
|Internal Dimension||W600xH500xD500 (mm)|
|External Dimension||W1600xH2000xD1700 (mm)|
of Testing zone
|Type B:-55degree ~+150degree
(200degree is Optional)
|High temperature Range of Testing zone: +60degree~+150degree(200degree is Optional); Low Temperature Range of Testing Zone: -10degree~-40degree/-55degree/-65degree|
|Exposure Time of
|Exposure Time of High Temperature:+60degree~+150degree(200degree is Optional) 30Mins|
|Exposure Time of Low Temperature:-10degree~Type B:-40degree/ Type B -55degree/ Type C -65degree 30Mins|
|RT~-75degree/ About 100mins|
|Temperature Recovery Time/
Control / Distribution
|Material of the inner box is SUS 304# stainless steel,of the outer box is stainless steel or SEE cold-rolled steel with paint coated.|
|Insulation Material||High temperature resistant, high density, formate chlorine, ethyl acetum foam insulation materials|
|Mechanics||P.I.D+S.S.R+ Micro-computer balanced temperature control system|
|Cooling System||Semi-hermetic double-stage compressor(water-cooled type) /Hermetic double-stage compressor (air-cooled type)|
|Non-fuse breaker, high and low pressure protective switch of the compressor ,refrigerator
high-pressure protective switch, failure warning system, electronic alarm
|Accessories||viewing window(special order)|
|Compressor||French “Tecumseh” Brand, Germany Bizter Brand|
|Power||AC220V 1∮ 3 lines,50/60HZ, AC380V 3∮ 5 lines,50/60HZ|
|Weight (Approx) (KG)||1000|
Contact Person: Louise Lu