Payment & Shipping Terms:
|High Temperature Range:||60degree To 150degree||Low Temperature:||-65degree 30Mins|
|Temperature Recovery Time:||≤5min||Conversion Time:||≤5sec|
temperature shock test chamber,
thermal shock test chamber
IEC68-2-14 Customized Three Chambers Vertical Thermal Shock Test Chamber
Warranty: one year free warranty for whole set machine,lifelong time maintainance.
Service:OEM service,Design service,Buyer lable service.
After-sale service: feedback within 2 hours after get the call.
About stable temperature cycling thermal shock test chamber technical parameters:
WxHxD ( mm)
|Temperature Range of Testing zone||
Type A:-40 °C~+150°C
( 200°C is Optional)
Type B:-55°C ~+150°C
( 200°C is Optional )
Type C:-65°C ~+150°C
( 200°C is Optional)
High temperature Range of Testing zone: +60ºC~+150ºC ( 200ºC is Optional);
Low Temperature Range of Testing Zone: -10ºC~-40ºC / -55ºC / -65ºC
Exposure Time of High/Low Temperature
|Exposure Time of High Temperature: +60°C ~ +150°C (200°C is Optional) 30Mins|
|Exposure Time of Low Temperature : -10°C~Type A:-40°C / Type B -55°C / Type C -65°C 30Mins|
Temperature of Heat-Storing Slot / Heating Time
Temperature of Cool-storing Slot / Cooling Time
|RT~-75°C/ About 100mins|
|Temperature Recovery Time / Conversion Time||≤5min/≤5sec|
|Control Accuracy / Distribution Uniformity||±0.5°C/±2°C|
|Internal and External Material||Material of the inner box is SUS 304# stainless steel,of the outer box is stainless steel or SEE cold-rolled steel with paint coated.|
|Insulation Material||High temperature resistant , high density , formate chlorine , ethyl acetum foam insulation materials|
|Mechanics||P.I.D+S.S.R+ Micro-computer balanced temperature control system|
|Cooling System||Semi-hermetic double-stage compressor(water-cooled type) /Hermetic double-stage compressor (air-cooled type)|
|Security Protection Devices||
Non-fuse breaker, high and low pressure protective switch of the compressor , refrigerator
high-pressure protective switch , failure warning system, electronic alarm
|Accessories||viewing window(special order)|
|Compressor||French 'Tecumseh' Brand, Germany Bizer Brand|
|Power||AC220V ,50/60HZ, AC380V ,50/60HZ|
Temperature Thermal Cycling Test Instrument of features:
1.It is divided into three zones: high temperature zone, low temperature zone, and testing zone. The test sample is in static mode.
2.Using touch-control graph control as operation interface, easy to operate.
3.Applying wind route conversation to the shock method to distribute temperature to the testing zone for cold and thermal shock measurement.
4.For high temperature shock or low temperature shock, max. time is up to 999H, and max. circulation cycles are 9999 times.
5.The system can be used for automatic Circulation Shock or manual selective shock.
6.Adopt binary cooling system, with quick cooling effect. Cooling method is water cooling.
7.Can entering normal temperature. RS-232 and RS-485 communication.
Application for IEC68-2-14 Hot Cold Impact Setting Test Chamber :
Thermal Test Equipment/ Thermal Shock Test Chamber is used to test the capability of material structure or composite materials to withstand the continuous environmental changes between extremely high temperature and low temperature during a short period, and therefore understand the chemical changes or physical damages caused by expansion from heat and contraction from cold in the shortest possible time. It is applicable to metals, plastic, rubber, electronics amongst other materials. The test result can be used as a reference or basis for product improvement.
Package with IC thermal shock test instrument:
PP film first, and then 10mm foam between machine and the case, and outside is standard export plywood case.
Short introduction about ASLi factory with thermal shocking testing cabinet:
We are a long history testing equipment manufacturer, in the past 25 years, we devoted to simulation environmental testing equipment and Mechannical vibration and shock testing machine.HAST Un-Saturated Steam Chamber is our star products, and we had obtained the CE certification for this machine.
Contact Person: Lily Chen