Payment & Shipping Terms:
|Internal Dimension:||W1000xH900xD900mm||External Dimension:||W2100xH2400xD2200mm|
|Temperature Range:||-65~200℃||Control Accuracy:||+/-0.5℃|
|Distribution Uniformity:||+/-2.0℃||Accessories:||Test Hole, Viewing Window|
thermal shock testing,
thermal shock test chamber
Electrical Heating Thermal Shock Testing Machine for LED, Thermal Shock Chamber
Electrical Heating Thermal Shock Testing Machine for LED, Thermal Shock Chamber is used to test the capability of material structure or composite materials to withstand the continuous environmental changes between extremely high temperature and low temperature during a short period, and therefore understand the chemical changes or physical damages caused by expansion from heat and contraction from cold in the shortest possible time. It is applicable to metals, plastic, rubber, electronics amongst other materials. The test result can be used as a reference or basis for product improvement.
Thermal Shock Chamber Technical Parameters:
|Internal Dimension WxHxD (mm)||400x350x350||500x400x400||600x500x500||700x600x600||800x750x750||1000x900 x900|
|External Dimension WxHxD (mm)||1400x1800 x1400||1550x1950x1550||1600x2000x1700||1700x2100x1750||1800x2200 x1900||2100x2400 x2200|
|Temperature Range of Testing zone||Type A:-40 ℃~+150℃ ( 200℃ is Optional)||Type B:-55℃ ~+150℃ ( 200℃ is Optional )||Type C:-65℃ ~+150℃ ( 200℃ is Optional)|
High temperature Range of Testing zone: +60ºC~+150ºC ( 200ºC is Optional);
Low Temperature Range of Testing Zone: -10ºC~-40ºC / -55ºC / -65ºC
|Exposure Time of High/Low Temperature||Exposure Time of High Temperature: +60℃ ~ +150℃ (200℃ is Optional) 30Mins|
|Exposure Time of Low Temperature : -10℃~Type A:-40℃ / Type B -55℃ / Type C -65℃ 30Mins|
|Temperature of Heat-Storing Slot / Heating Time||RT~200℃/About 45mins|
|Temperature of Cool-storing Slot / Cooling Time||RT~-75℃/ About 100mins|
|Temperature Recovery Time / Conversion Time||≤5min/≤5sec|
|Control Accuracy / Distribution Uniformity||±0.5℃/±2℃|
|Internal and External Material||Material of the inner box is SUS 304# stainless steel,of the outer box is stainless steel or see cold-rolled steel with paint coated.|
|Insulation Material||High temperature resistant , high density , formate chlorine , ethyl acetum foam insulation materials|
|Mechanics||P.I.D+S.S.R+ Micro-computer balanced temperature control system|
|Cooling System||Semi-hermetic double-stage compressor(water-cooled type) /Hermetic double-stage compressor (air-cooled type)|
|Security Protection Devices||Non-fuse breaker, high and low pressure protective switch of the compressor , refrigerator high-pressure protective switch , failure warning system, electronic alarm|
|Accessories||viewing window(special order)|
|Compressor||French 'Tecumseh' Brand, Germany Bizer Brand|
|Power||AC220V 1phase 3 lines ,50/60HZ, AC380V 3 phase 5 lines ,50/60HZ|
|Weight (Approx)||450 Kg||600 Kg||750 Kg||900 Kg||1300 Kg||1500 Kg|
Electrical Heating Thermal Shock Testing Machine Features:
1.It is divided into three zones: high temperature zone, low temperature zone, and testing zone. The test sample is in static mode.
2.Using touch-control graph control as operation interface, easy to operate.
3.Applying wind route conversation to the shock method to distribute temperature to the testing zone for cold and thermal shock measurement.
4.For high temperature shock or low temperature shock, max. time is up to 999H, and max. circulation cycles are 9999 times.
5.The system can be used for automatic Circulation Shock or manual selective shock.
6.Adopt binary cooling system, with quick cooling effect. Cooling method is water cooling.
7.Can entering normal temperature. RS-232 and RS-485 communication.
1.Graceful appearance, circularly shaped body, surface treated with mist strips and plane handle with no reaction. Easy to operate, safe and reliable.
2.Interior material:SUS#304 stainless steel , mirror polishing.
3.Exterior material:SUS#304 stainless steel.
4.Insulation Material:Resistant to high temperature, high density, formate chlorine, ethyl acetum foam insulation materials.
5.Test hole: One hole (Dia.50mm or Dia.100mm) on left side of chamber, for connecting outside 's powerline or signal line.
Electrical Heating Thermal Shock Testing Machine for LED Control system:
1.Imported LCD display screen, capable of displaying the measured value as well as the set value and time.
2.Fixed condition or programmable condition can be set.
3.Fixed condition setting time range: 999 H .
4.Programmable mold can set 120 different programe at the same time, each programe can set serverial segement to do cycle testing.
5.Each prgrame can have max.50 segement with different temperature setting,segement runing time
Max.530 H99M , Max.can do 999 times cycle."
6.With power off memory device, reply message to continue with the rest of the program.
7.The control unit has the functions of multiples segment program editing, and of quick or slope control of temperature and humidity.
8.With TIMER SIGNAL OUTPUT RELAY.
9.Temperature sensor adopt DIN PT-100Ω.
10. Adpot BTHC system to control temperature and humidity , P.I.D. control S.S.R.
11.With P.I.D. auto calculate funtion.
Short introduction about ASLi factory:
We are a long history testing equipment manufacturer, in the past 28 years, we devoted to simulation environmental testing equipment and Mechannical vibration and shock testing machine. Electrical Heating Thermal Shock Testing Machine for LED, Thermal Shock Chamber is our star products , and we had obtained the CE certification for this machine.
Package: PP film first, and then 10mm foam between machine and the case, and outside is standard export plywood case.
Customers' Visit ASLi Company:
Warranty: one year free warranty for whole set machine,lifelong time maintainance.
After-sale service: feedback within 8 hours after get the call or email.
Service:OEM service,Design service,Buyer lable service.
Contact Person: Lily Chen