Payment & Shipping Terms:
|Temperature Range:||-65℃ ~+150℃||Internal Dimension:||W500xH400xD400mm|
|Temperature Recovery Time:||≤5min||Control Accuracy:||±0.5℃|
|Distribution Uniformity:||±2℃||Function:||PCB Board|
thermal shock testing,
temperature shock test chamber
-65℃ ~+150℃ Thermal Temperature Shock Testing Chamber for PCB Board
High Low Temperature Shock Testing Chamber, TS-80(A~C) Thermal Shock Chambers is used to test the capability of material structure or composite materials to withstand the continuous environmental changes between extremely high temperature and low temperature during a short period, and therefore understand the chemical changes or physical damages caused by expansion from heat and contraction from cold in the shortest possible time. It is applicable to metals, plastic, rubber, electronics amongst other materials. The test result can be used as a reference or basis for product improvement.
Thermal Temperature Shock Testing Chamber Features:
1.It is divided into three zones: high temperature zone, low temperature zone, and testing zone. The test sample is in static mode.
2.Using touch-control graph control as operation interface, easy to operate.
3.Applying wind route conversation to the shock method to distribute temperature to the testing zone for cold and thermal shock measurement.
4.For high temperature shock or low temperature shock, max. time is up to 999H, and max. circulation cycles are 9999 times.
5.The system can be used for automatic Circulation Shock or manual selective shock.
6.Adopt binary cooling system, with quick cooling effect. Cooling method is water cooling.
7.Can entering normal temperature. RS-232 and RS-485 communication.
TS-80(A~C) Thermal Temperature Shock Chambers Technical parameters:
|Internal Dimension WxHxD (mm)||400x350x350||500x400x400||600x500x500||700x600x600||800x750x750||1000x900x900|
|External Dimension WxHxD (mm)||1400x1800x1400||1550x1950x1550||1600x2000x1700||1700x2100x1750||1800x2200x1900||2100x2400x2200|
|Temperature Range of Testing zone||Type A:-40 ℃~+150℃ ( 200℃ is Optional)||Type B:-55℃ ~+150℃ ( 200℃ is Optional )||Type C:-65℃ ~+150℃ ( 200℃ is Optional)|
High temperature Range of Testing zone: +60ºC~+150ºC ( 200ºC is Optional);
Low Temperature Range of Testing Zone: -10ºC~-40ºC / -55ºC / -65ºC
|Exposure Time of High/Low Temperature||Exposure Time of High Temperature: +60℃ ~ +150℃ (200℃ is Optional) 30Mins|
|Exposure Time of Low Temperature : -10℃~Type A:-40℃ / Type B -55℃ / Type C -65℃ 30Mins|
|Temperature of Heat-Storing Slot / Heating Time||RT~200℃/About 45mins|
|Temperature of Cool-storing Slot / Cooling Time||RT~-75℃/ About 100mins|
|Temperature Recovery Time / Conversion Time||≤5min/≤5sec|
|Control Accuracy / Distribution Uniformity||±0.5℃/±2℃|
|Internal and External Material||Material of the inner box is SUS 304# stainless steel,of the outer box is stainless steel or see cold-rolled steel with paint coated.|
|Insulation Material||High temperature resistant , high density , formate chlorine , ethyl acetum foam insulation materials|
|Mechanics||P.I.D+S.S.R+ Micro-computer balanced temperature control system|
|Cooling System||Semi-hermetic double-stage compressor(water-cooled type) /Hermetic double-stage compressor (air-cooled type)|
|Security Protection Devices||Non-fuse breaker, high and low pressure protective switch of the compressor , refrigerator high-pressure protective switch , failure warning system, electronic alarm|
|Accessories||viewing window(special order)|
|Compressor||French 'Tecumseh' Brand, Germany Bizer Brand|
|Power||AC220V 1∮ 3 lines ,50/60HZ, AC380V 3∮ 5 lines ,50/60HZ|
|Weight (Approx)||450 Kg||600 Kg||750 Kg||900 Kg||1300 Kg||1500 Kg|
1. With no-fuse protection switch
2. Control system with phase sequence protection and low voltage electrical protection.
3. With over-heat protection switch.
4. Over load protection device for refrigeration compressor.
5. Refrigeration compressor high and low voltage protection switch.
6. Refrigeration compressor over oil pressure protection.
7. Lack of Anti-phase protection system.
8. Overload protection for circulation fan motor.
Warranty: one year free warranty for whole set machine,lifelong time maintainance.
After-sale service: feedback within 8 hours after get the call or email.
Service:OEM service,Design service,Buyer lable service.
Certificate of these the machine:
China official 3rd party calibration report
Short introduction about ASLi factory:
We are a long history testing equipment manufacturer, in the past 28 years, we devoted to simulation environmental testing equipment and Mechannical vibration and shock testing machine. High Low Temperature Shock Testing Chamber, TS-80(A~C) Thermal Shock Chambers is our star products , and we had obtained the CE certification for this machine .
For the package:
1. PP film first
2. Vacuum package
3. PP film again
4. 10mm thickness PU foam to avoid collision
5. stronged plywood case
6. Standard ASLI CASE MARK
ASLi main test equipments:
If you have any question with our ASLI Thermal shock test chamber , pls kindly feel free to contact with us , thank you.
Contact Person: Louise Lu