|
Product Details:
Payment & Shipping Terms:
|
Temperature Range: | -65C To 150C Impact | Exposure Time Of High Tempearture: | 60~150C 30mins |
---|---|---|---|
Exposure Time Of Low Temperature: | -10~65C 30mins | Recovery Time: | Less Than 5 Mins |
Material: | SUS 304# | Cooling: | Air Cooling Or Water Cooling |
Compressor: | Tecumseh Or | ||
High Light: | thermal shock testing,temperature shock test chamber |
Three Zone Cold and Hot Thermal Shock Chamber for Temperature Impact
Product description:
Cold and hot chamber consists of two separately controlled hot and cold zones with product being transferred between these zones for rapid product temperature changes. It is used to test the changes in physical of the electronic chip IC, PCB, semiconductor ceramic and polymer materials, and composite material and material structure’s result which under continuous environment with high temperature or low temperature shock in short time. It means this product can test the material’s chemical change or physics change by expansion and contraction within short time.
Features:
Cold and hot chamber is divided into three zones: the high temperature zone, the low temperature zone and test zone.
1. LCD touch panel controller can display Chinese / English. Big size TFT LCD panels are also adopted.
2. High formula memory capacity can be set to 120 patterns. The maximum cycle setting is 9999 times. The maximum setting of each section is 999 Hrs 59 Mins.
3. Equipped with RS-232C communication interface device, capable of controlling / editing/ recording in the linkage with the computer and two set dynamic connection point and convenient application.
4. Both 2 zone and 3 zone shocks can be chosen.
5. All equipments are fully automatic, and all process are precisely controlled with PLC.
6. If any parts have errors, the machine will automatically shuts down and a warning light switches on.
7. Machine can be shut down automatically in case of electrical power instabilities.
Technical parameters:
Model |
TS-45(A~C) |
TS-80(A~C) |
TS-150(A~C) |
TS-252(A~C) |
TS-450(A~C) |
||||
Internal Dimension WxHxD ( mm) |
400x350x350 |
500x400x400 |
600x500x500 |
700x600x600 |
800x750x750 |
||||
External Dimension WxHxD (mm) |
1400x1800x1400 |
1550x1950x1550 |
1600x2000x1700 |
1700x2100x1750 |
1800x2200x1900 |
||||
Temperature Range of Testing zone |
Type A: -40 °C~+150°C (200°C is optional) |
Type B:-55°C ~+150°C (200°C is optional) |
Type C:-65°C ~+150°C (200°C is optional) |
||||||
High temperature Range of Testing zone: +60°C to +150°C,(200°C is optional); Low Temperature Range of Testing Zone: -10°C to -40°C/-55°C/-65°C |
|||||||||
Exposure Time of High/Low Temperature |
Exposure Time of High Temperature:+60°C to +150°C (200°C is Optional),needs about 30Mins |
||||||||
Exposure Time of Low Temperature:-10°C to A-40°C/ B -55°C/ C -65°C, needs about 30Mins |
|||||||||
Temperature of hot zone/Heating Time |
RT~200°C/About , needs about 45mins |
||||||||
Temperature of cold zone/Cooling Time |
RT~ -75°C/ About ,needs about 100mins |
||||||||
Temperature Recovery Time/ Conversion Time |
≤5min /≤5sec |
||||||||
Control Accuracy / Distribution Uniformity |
±0.5°C/±2°C |
||||||||
Material |
Interior material is SUS 304# stainless steel,exterior is stainless steel or SEE cold-rolled steel with paint coated. |
||||||||
Insulation Material |
High temperature resistant, high density, formate chlorine, ethyl acetum foam insulation materials |
||||||||
Mechanics |
P.I.D+S.S.R+ Micro-computer balanced temperature control system |
||||||||
Cooling System |
Semi-hermetic double-stage compressor(water-cooled type) ; Hermetic double-stage compressor (air-cooled type) |
||||||||
Security Protection Devices |
Non-fuse breaker, high and low pressure protective switch of the compressor , refrigerator high-pressure protective switch, failure warning system, electronic alarm |
||||||||
Accessories |
viewing window (Optional |
||||||||
Compressor |
French Tecumseh Brand, Germany Bizer Brand |
||||||||
Power |
AC220V 50/60HZ, AC380V 50/60HZ |
||||||||
Weight (Approx. kg) |
450 |
600 |
750 |
950 |
1200 |
Contact:
Ms.Joanna Wen
ASLi (CHINA) TEST EQUIPMENT CO., LTD
Company Add.:Building C,JinHui Industrial Park, LiXin town,East City district 523125,DongGuan City,China
Tel.:0086-769-23164266
Fax:0086-769-22851784
Skype: wenyumin2013
Whatsapp: 008613794918303
Website:http://www.aslitesting.com
Contact Person: Ms.Joanna Wen
Tel: +8613826932967
-70 to +150 Degree Climate Temperature Humidity Test Chamber Price
Walk-In Climate Test Chamber For Low High Temperature And Humidity Testing
HL-225-F High And Low Temperature Cycle Test Chamber Has Cyclical System
Walk-in Temperature Humidity Testing Room, Environmental Walk-in Chamber
Customized Walk In Climatic Test Chamber Environmental Test Equipment
20% - 98% Rh Walk In Climatic Stability Chamber Electronic For Auto Spare Parts
Sunshine Simulation Uv / Xenon Aging Room Walk In Stability Chamber For Color Fastness Test
Vertical Type Sine Shock Vibration Temperature Humidity Test Chamber
Electromagnetic Horizontal X / Y Axle vibration Test System 20 Kn Exiting Force
350000N Max Sine Force Vibration Measuring Instruments / Vibration Analysis Equipment
5 - 2000hz Vibration Test System 20kn Force With Vertical Horizontal Bench